Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →

Greenhouse Battery — Sodium-ion for Ventilation and Irrigation

Home / News and Blog / Greenhouse Battery — Sodium-ion for Ventilation and Irrigation
Greenhouse Battery — Sodium-ion for Ventilation and Irrigation
16 Nov 2026

A greenhouse needs power at the far end of the plot, where running a cable is expensive and a generator is not allowed near the crop. Ventilation and irrigation are the two loads that cannot wait.

What the loads look like

Load Draw Duty
Roof vent motors 300–800 W Minutes, several times a day
Circulation fans 200–1,000 W Hours in summer
Irrigation pump 0.75–3 kW Surge on start, then steady
Supplemental lighting 1–5 kW Evenings in winter

Humidity is the enclosure problem

A greenhouse runs at 80–95% relative humidity. The battery enclosure needs a proper seal and a breather that manages pressure without letting moisture in — condensation inside a case is what kills packs in this environment, not the cells.

Seasonal duty

A greenhouse battery cycles hard in summer and sits idle in winter. Sodium tolerates both, and it does not need heating to sit through a cold spell — which matters where the pack is in an unheated service area.

Where it does not pay

Where the plot has mains at the greenhouse and the loads are modest, a cable is cheaper. Remote plots and polytunnels without a supply are where a battery system makes sense.

Where to go next

Products for this application

Industrial & traction 7 models · specs and sizes Lead-acid replacement 78 models · specs and sizes 24 V 160 Ah forklift sodium-ion battery — 9S, 4.1 kWh single product · full specification

Have a specification question this article does not answer? Send it with the numbers you already have.

Request a quote

Part of

More guides in this group