Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →

Solar Street Light Battery — Sodium-ion for Outdoor Lighting

Home / News and Blog / Solar Street Light Battery — Sodium-ion for Outdoor Lighting
Solar Street Light Battery — Sodium-ion for Outdoor Lighting
16 Nov 2026

A solar street light cycles every single day and lives inside a pole that gets hot in summer and cold in winter. The battery is usually the first failure, and it is the hardest part to replace.

What a lamp needs

Lamp Nightly energy Typical pack
20 W LED, 10 h 200 Wh 12 V 20–30 Ah
50 W LED, 10 h 500 Wh 12 V 50 Ah
100 W LED, 10 h 1 kWh 12 V 100 Ah

Heat in the pole

An aluminium pole in direct sun can exceed 60 °C inside. That accelerates ageing in any chemistry, which is why pole-mounted packs are derated and why ventilation or a shaded mounting position matters more than the cell label.

Winter autonomy

Winter brings less sun and lower capacity at the same time. Sizing must use the worst month’s insolation and the capacity at the coldest design temperature — sizing on summer data is why so many lamps go dark in January.

Where it does not pay

Where mains power is available and the lamp is cheap, a cabled LED street light is still the lowest-cost option. Solar lamps pay where trenching is expensive.

Where to go next

Products for this application

Lead-acid replacement 78 models · specs and sizes ESS 4 models · specs and sizes ZB-1204 12.8 V 4 Ah lead-acid replacement battery single product · full specification

Have a specification question this article does not answer? Send it with the numbers you already have.

Request a quote

Part of

More guides in this group