Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
← All tools
  1. 1Find a cell
  2. 2Check the spec
  3. 3Configure the pack
  4. 4Layout and BOM
  5. 5Runtime
  6. 6Cold weather
  7. 7Thermal
  8. 8Compression
  9. 9Cables
Next: Cables →

Tools

Compression force calculator

A prismatic cell needs the right stack pressure to keep its cycle life. Enter the cell face and the pressure you want — get the total force and the bolt preload that delivers it.

Home / Compression Force Calculator

A cell datasheet quotes stack pressure in kgf/cm², MPa or psi. Force is pressure multiplied by the face area — so the same pressure means a very different force on a 100 Ah cell and on a 300 Ah one. Too little and the electrode stack loosens; too much and the separator is crushed.

Force (N) = Pressure (MPa) × Area (mm²) · 1 kgf/cm² = 0.09807 MPa

Inputs

mm
mm

The two edges of the face that gets compressed — not the thickness.

pcs
pcs

Set to 0 to skip the per-bolt figure.

Force on the stack

—

 

  • Cell face area—
  • Pressure—
  • Total force—
  • Same force in kgf—
  • Per bolt—
  • Bolt size guide—

Force is shared by the end plates, so the bolts carry the whole stack — a 16-cell stack at 0.5 MPa is a few tonnes, not a few hundred kilos. Use a torque wrench and a plate stiff enough not to bow; the cell sees the pressure at the centre, not at the bolts.