Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Battery test benches in the Polytone quality laboratory

Projects & services

Quality & compliance

Reliable sodium-ion power, built with controlled manufacturing processes — and the test records to prove it.

Sodium-ion is a young chemistry, and most of the questions we get are not about price — they are about whether the cell is what the datasheet says it is. This page sets out what we test, what we do not, and what travels with the goods.

Home / Quality & Compliance
CE, MSDS, UN38.3 and ISO certified

CE marking, MSDS and UN38.3 test summaries travel with every consignment. ISO 9001 covers the pack assembly line.

Packed batteries ready for shipment
01

What arrives with every shipment

A test report for the packs in the carton, a UN38.3 summary, the MSDS and a packing list that matches the labels on the boxes. Not a link to a generic PDF — the report for the batch you were sent.

Cells being inspected on arrival
02

Incoming inspection

Every cell batch is checked on arrival: open-circuit voltage, internal resistance and physical dimensions. A batch that drifts outside its own spread is quarantined before it reaches a pack.

Battery test bench cycling packs
03

What we test, and what we do not

Capacity, rate capability, cycle life at pack level, over-charge and over-discharge protection, short circuit, vibration and the temperature cut-offs. We do not run automotive homologation, ECE R100 or grid-code certification in-house — we will tell you which lab does, and what it costs.

Serial label on a finished pack
04

Traceability

Each pack carries a serial and each serial maps to a cell batch, a BMS firmware version and the test record it was released on. Ask for a serial years later and the record still points at the same batch.

Where the numbers come from

Cycle life, capacity and internal resistance on this site come from pack-level tests run on our own bench, not from a cell supplier’s brochure. When a figure is a supplier figure we say so on the page. Where a number depends on how the pack is used — depth of discharge, ambient temperature, charge rate — we state the test condition next to it.

Ask for the file

Tell us the model and the serial if you have it. We will send the test report, the MSDS and the UN38.3 summary for that batch — usually the same working day.

Request the test file

Two questions about test reports

Which standard applies to my product?

Cell level: GB 38031 for traction safety, GB/T 44265 for sodium-ion cells, IEC 62619 for industrial use. Pack level: ECE R100 for vehicles, UL 9540A for stationary propagation.

What travels with a sodium shipment?

Three documents: the UN38.3 test summary, the MSDS, and a state-of-charge declaration. A missing one is where a container sits at the port.

Still deciding?

Need the test reports, the certificates or the incoming inspection data behind these claims? Ask and we will send the documents we hold.

Request a quote