Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →

The Future of Sodium-Ion, 2026–2035

Home / News and Blog / The Future of Sodium-Ion, 2026–2035
The Future of Sodium-Ion, 2026–2035
16 Nov 2026

Forecasts usually describe a chemistry that does not exist yet. Here is what ships now, what is likely by 2030, and what to treat as research.

Deliverable today

Cells from about 0.65 Ah to 190 Ah in three formats, 3,000–8,000 cycles in daily duty, discharge to −40 °C, charge windows starting below 0 °C on selected cells, and packs that pass UN38.3 and GB standards.

Energy density sits roughly 20–30% below LFP at cell level, and that gap is not closing this year.

Likely by 2030

Cell energy density in the 160–200 Wh/kg range from improved layered oxide and NFPP variants, larger prismatic formats for stationary use, and lower cost per cycle as manufacturing scales.

Hard carbon supply and first-cycle efficiency are the constraints to watch. Both are process problems, so both improve with volume.

Still research

Solid-state sodium is demonstrated in laboratories, not in volume production. Treat any 2026 claim of shipping solid-state sodium as a request for the datasheet.

200 Wh/kg at pack level is a research target, not a product.

How to plan around it

Do not delay a project for a roadmap. Design for the cells that exist, with an architecture that can take a better cell in three years — same footprint, same busbar, higher capacity.

The chemistry will improve. The project still has to pay back before it does.

What is already in the catalogue

Production cells now span 1.3 Ah in an 18650 to 352 Ah in a large prismatic, with 190 Ah and 220 Ah formats in between. The energy-density ceiling has not moved as fast as the format range — which is why the near-term gains are in system design, not in Wh/kg.

Where to go next

Questions we get asked about this

Is solid-state sodium available now?

In laboratories, not in volume production. Ask for a shipping datasheet before planning around it.

Should I wait for better cells?

No. Design for the cells that exist, with an architecture that can take a better one later.

Products for this application

Sodium-ion Batteries 62 models · specs and sizes Lead-acid replacement 78 models · specs and sizes Prismatic Cells 20 models · specs and sizes 10145138 Sodium-ion Cell, 10 Ah, Pouch single product · full specification

Have a specification question this article does not answer? Send it with the numbers you already have.

Request a quote

Part of

More guides in this group