Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →

Pallet Jack Battery — Sodium-ion for Electric Pallet Trucks

Home / News and Blog / Pallet Jack Battery — Sodium-ion for Electric Pallet Trucks
Pallet Jack Battery — Sodium-ion for Electric Pallet Trucks
16 Nov 2026

An electric pallet truck charges in the gaps between loads, not overnight. That duty is where lead-acid struggles and where a sodium pack earns its price.

24 Vmost pallet trucks and stackers
20–85 Ahtypical original capacity
Gap chargingpartial charges, no sulphation
1C+pump draw, not traction

What these trucks use

Class Voltage Original Shift draw
Hand pallet truck 24 V 2 × 12 V 20–40 Ah 5–15 Ah
Powered stacker 24 V 2 × 12 V 60–85 Ah 20–40 Ah
Reach truck 24 V / 48 V 2–4 × 12 V, or 2 V cells 30–60 Ah

Common brands: Toyota BT, Jungheinrich, Still, Linde, Crown, Hyster, Hangcha, EP. The truck brand rarely changes the pack — the bay and the charger do.

How to size the pack

1. Shift draw. A stacker lifting 1.5 t through a shift uses 20–40 Ah. Measure it, do not estimate from the old label.

2. Charge pattern. If the truck charges at breaks, the pack only has to cover the longest unbroken run. That is what lets a smaller pack replace a bigger lead-acid block.

3. Pump current. Lifting draws more than driving. Check the pack’s continuous rating against the pump motor, not against the traction motor.

Opportunity charging is the point

A lead-acid block charged in short bursts between loads sulphates and loses capacity. A sodium pack accepts partial charges without that penalty, which is what lets one truck cover a full shift without a battery change.

What to check before ordering

Bay dimensions, terminal layout, charger profile and whether the truck’s gauge reads voltage. The gauge is the usual complaint afterwards: it shows empty while the pack still has usable charge.

Where it does not pay

A single truck, overnight charging. In a small warehouse with a cheap tariff, the payback is slow.

A truck at end of life. A premium pack will outlive the truck.

Questions buyers ask

Will the existing charger work?

Only if its profile can be set for the pack. A fixed lead-acid charger will not terminate correctly.

Can it stay on charge all weekend?

Yes, the BMS stops at full charge. Unlike lead-acid, sitting at full does not shorten life noticeably.

Why does the gauge show empty?

It reads voltage, and sodium’s curve is flatter. A shunt gauge fixes it.

Can I use it in a freezer warehouse?

Discharge yes; charging needs the pack above its floor, so charge in a warm bay.

Where to go next

Products for this application

Industrial & traction 7 models · specs and sizes 24 V 160 Ah forklift sodium-ion battery — 9S, 4.1 kWh single product · full specification

Have a specification question this article does not answer? Send it with the numbers you already have.

Request a quote

Part of

More guides in this group