
A ride-on sweeper runs a full shift with a brush motor, a vacuum fan and a water pump, then charges overnight. It is a deep, predictable cycle — which is exactly the duty where cycle cost beats purchase price.
What the machines use
| Class | Voltage | Original |
|---|---|---|
| Walk-behind sweeper | 24 V | 2 × 12 V |
| Ride-on sweeper | 24 V / 36 V | 2–3 × 12 V |
| Street sweeper | 48 V | 4 × 12 V or traction cells |
Brands in this segment: Tennant, Hako, Kärcher, Nilfisk, Dulevo, Elgin, Bucher. The pack is usually in a compartment under the seat, so bay dimensions and access decide the fitment.
Dust and heat
Sweepers work in dust. Any pack with an open vent or a fan-cooled BMS needs a filter; a sealed enclosure with a thermal path is the better answer. The battery compartment also sits next to the motor, so ambient there runs hotter than the street.
Charging between routes
Municipal fleets often run two shifts with a short window between them. Sodium accepts a partial charge in that window without the capacity loss lead-acid suffers, which is the practical argument for the change.
Where it does not pay
A single machine on a short route with a cheap overnight tariff rarely justifies the swap. Multi-shift fleets and cold-climate operations do.

