Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →

Floor Scrubber Battery — Sodium-ion for 24 V and 36 V Machines

Home / News and Blog / Floor Scrubber Battery — Sodium-ion for 24 V and 36 V Machines
Floor Scrubber Battery — Sodium-ion for 24 V and 36 V Machines
16 Nov 2026

A scrubber runs a fixed route, comes back to the same charger and repeats tomorrow. That predictable duty is exactly what a sodium pack handles well — and what a lead-acid set handles badly after two years.

24 / 36 Vmost ride-on machines
2–3 × 12 Vwhat is being replaced
On-board chargerthe part that usually has to change
Shunt gaugevoltage gauges mislead on sodium

Machines and what they use

Brand Typical models Pack Original
Tennant T, TSB, 5680 24 V 2 × 12 V 130–180 Ah
Nilfisk SC, BR, Advance 24 V / 36 V 2–3 × 12 V
Kärcher BR, B, BD 24 V / 36 V 2–3 × 12 V
Hako B, Citymaster 24 V / 36 V 2–3 × 12 V
Minuteman Sentinel, Max Ride 24 V / 36 V 2–3 × 12 V

The machine brand rarely decides the pack. Bay size, terminal layout and the on-board charger decide it.

How to size the pack

1. Measure a shift. A ride-on scrubber typically draws 40–80 Ah over a four-hour shift; a walk-behind, 15–30 Ah.

2. Divide by usable depth. At 80% depth, a 100 Ah pack gives 80 Ah usable — one shift with margin, or two short shifts.

3. Check the brush motor. The brush and vacuum motors draw far more than traction. The pack’s continuous rating, not its capacity, is what keeps the machine from derating mid-aisle.

What changes when the pack changes

Most scrubbers charge through an on-board charger. If that charger has a fixed lead-acid profile, it will not terminate correctly on a sodium pack — the practical answer is an external charger with a programmable profile, or a replacement on-board unit.

The battery gauge reads voltage on most of these machines, which is misleading on a sodium pack. A shunt gauge is the fix; without it the operator sees “empty” while the pack still has charge.

Where it does not pay

A single machine, mild warehouse. Four hours a day in a heated building rarely justifies the change.

A machine due for replacement. Fitting a premium pack to a machine at the end of its life is money that will not be recovered.

A fleet tied to a lead-acid maintenance contract. Contract terms often decide the chemistry, not engineering.

Questions buyers ask

Can I keep the on-board charger?

Only if it can be reprogrammed. A fixed lead-acid profile will undercharge or hold the pack at the wrong voltage.

Why does the gauge show empty early?

It reads voltage, and sodium holds a flatter curve. A shunt gauge measures energy in and out instead.

Will the machine run longer?

Usually similar or slightly longer per charge, because sodium discharges deeper without the capacity loss lead-acid takes.

Can it be charged between shifts?

Yes, and that is the main operational gain — partial charges do not damage the pack the way they damage lead-acid.

Where to go next

Products for this application

Sodium-ion Batteries 62 models · specs and sizes Lead-acid replacement 78 models · specs and sizes Prismatic Cells 20 models · specs and sizes 10145138 Sodium-ion Cell, 10 Ah, Pouch single product · full specification

Have a specification question this article does not answer? Send it with the numbers you already have.

Request a quote

Part of

More guides in this group