Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →

Mobility Scooter Battery — Sodium-ion 24 V Packs

Home / News and Blog / Mobility Scooter Battery — Sodium-ion 24 V Packs
Mobility Scooter Battery — Sodium-ion 24 V Packs
16 Nov 2026

A mobility scooter battery is bought twice: once for range, and once because the old set will not hold charge through a winter. Weight matters as much as capacity.

What the scooters use

Class Pack Original
Folding / travel scooter 24 V 12–20 Ah 2 × 12 V 12–20 Ah
Mid-size scooter 24 V 40–50 Ah 2 × 12 V 40–50 Ah
Power wheelchair 24 V 50–75 Ah 2 × 12 V AGM

Most are 24 V with two 12 V blocks. The pack drops into the same bay, and the weight difference — often 10–15 kg less — is what users notice first.

Charging at home

The supplied charger is almost always matched to lead-acid. On a sodium pack it will not reach the correct termination voltage, so the charger has to change with the pack. This is the one part of the swap that cannot be left to the customer.

Cold weather and storage

Discharge works well below zero, which suits a scooter stored in an unheated garage. Charging needs the pack above its cut-off temperature, so winter charging is best done indoors.

Where it is not suitable

If the scooter’s controller has a fixed low-voltage cut-off for lead-acid, it will read the sodium pack as empty early. Check the controller before quoting, and check whether the user’s charger can be replaced.

Where to go next

Products for this application

EV packs 22 models · specs and sizes Two-wheelers 14 models · specs and sizes 4850 — 48 V 50 Ah sodium-ion pack single product · full specification

Have a specification question this article does not answer? Send it with the numbers you already have.

Request a quote

Part of

More guides in this group