Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →

Two-wheelers

Showing all 14 results

CE, MSDS, UN38.3 and ISO certified

Two- and three-wheeler sodium-ion packs

60 V / 72 V · 30 / 50 / 100 Ah

  • App monitoring The BMS reports state of charge, voltage, current and faults to a phone app, so the rider sees a weak cell before it strands them.
  • A-grade sodium-ion cells Prismatic sodium-ion cells from our own line, matched for internal resistance so the pack stays balanced under load and up a hill.
  • Fault protection Over-charge, over-discharge, short circuit and over-current cut-outs, in a sealed steel shell that takes a dropped bike.
  • 36-month warranty Cycle life tested at pack level, not just on a single cell. 36 months from delivery, with the test report on request.
Electric two-wheeler and cargo tricycle

Two-wheeler packs

Packs for scooters, e-bikes and mopeds, mostly 48 V, 60 V and 72 V.

The charger and the controller set the limits, not the pack. A 48 V sodium pack is not a drop-in for a 48 V lead-acid set until the low-voltage cut-off is raised.

4850 — 48 V 50 Ah sodium-ion pack

4850 · 50 Ah · 16S · regular or heated version

Pack size
264 × 292 × 183 mm (without handle)
Cell configuration
16S
Cells used
BW 60145 / DFD 60150
Cell type
Sodium-ion (Na-ion)
Nominal voltage
51.2 V
Capacity
50 Ah
Energy
2.56 kWh
Voltage range
40–58.4 V
Charging voltage
57.6 ±0.2 V
Charging current
5–25 A
Maximum continuous discharge current
50 A
Motor
≤ 1500 W
Weight
20.6 ±1 kg
Operating temperature
−30 to +55 °C
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Module 16S Battery module

48100 — 48 V 100 Ah sodium-ion pack

48100 · 100 Ah · 16S · regular or heated version

Pack size
593 × 266 × 217 mm (without handle)
Cell configuration
16S
Cells used
BW 60145 / DFD 60150
Cell type
Sodium-ion (Na-ion)
Nominal voltage
51.2 V
Capacity
100 Ah
Energy
5.12 kWh
Voltage range
40–58.4 V
Charging voltage
57.6 ±0.2 V
Charging current
5–50 A
Maximum continuous discharge current
100 A
Motor
≤ 3000 W
Weight
40.5 ±1 kg
Operating temperature
−30 to +55 °C
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Module 16S Battery module

6430 — 64 V 30 Ah sodium-ion pack

6430 · 30 Ah · 20S · regular or heated version

Shell size
390 × 265 × 170 mm
Cell configuration
20S
Cells used
BW 60145 / DFD 60150
Chemistry
Sodium-ion (Na-ion)
Nominal voltage
64 V
Capacity
30 Ah
Energy
1.92 kWh
Voltage range
50–73 V
Charging voltage
73 ±0.2 V
Charging current
5–25 A
Maximum continuous discharge current
80 A
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Module 20S Battery module

7630 — 76 V 30 Ah sodium-ion pack

7630 · 30 Ah · 24S · regular or heated version

Shell size
453 × 265 × 170 mm
Cell configuration
24S
Cells used
BW 60145 / DFD 60150
Chemistry
Sodium-ion (Na-ion)
Nominal voltage
76.8 V
Capacity
30 Ah
Energy
2.30 kWh
Voltage range
60–87.6 V
Charging voltage
87.6 ±0.2 V
Charging current
5–25 A
Maximum continuous discharge current
80 A
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Module 24S Battery module

6440 — 64 V 40 Ah sodium-ion pack

6440 · 40 Ah · 20S · regular or heated version

Shell size
390 × 265 × 170 mm
Cell configuration
20S
Cells used
BW 60145 / DFD 60150
Chemistry
Sodium-ion (Na-ion)
Nominal voltage
64 V
Capacity
40 Ah
Voltage range
50–73 V
Charging voltage
73 ±0.2 V
Charging current
5–25 A
Maximum continuous discharge current
80 A
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Module 20S Battery module

7640 — 76 V 40 Ah sodium-ion pack

7640 · 40 Ah · 24S · regular or heated version

Shell size
453 × 265 × 170 mm
Cell configuration
24S
Cells used
BW 60145 / DFD 60150
Chemistry
Sodium-ion (Na-ion)
Nominal voltage
76.8 V
Capacity
40 Ah
Voltage range
60–87.6 V
Charging voltage
87.6 ±0.2 V
Charging current
5–25 A
Maximum continuous discharge current
80 A
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Module 24S Battery module

6430 — 64 V 30 Ah sodium-ion pack, module type

6430m · 30 Ah · 20S · regular or heated version

Shell size
390 × 265 × 170 mm
Cell configuration
20S
Cells used
BW 60145 / DFD 60150
Chemistry
Sodium-ion (Na-ion)
Nominal voltage
64 V
Capacity
30 Ah
Energy
1.92 kWh
Voltage range
50–73 V
Charging voltage
73 ±0.2 V
Charging current
5–25 A
Maximum continuous discharge current
80 A
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Module 20S Battery module

7630 — 76 V 30 Ah sodium-ion pack, module type

7630m · 30 Ah · 24S · regular or heated version

Shell size
453 × 265 × 170 mm
Cell configuration
24S
Cells used
BW 60145 / DFD 60150
Chemistry
Sodium-ion (Na-ion)
Nominal voltage
76.8 V
Capacity
30 Ah
Energy
2.30 kWh
Voltage range
60–87.6 V
Charging voltage
87.6 ±0.2 V
Charging current
5–25 A
Maximum continuous discharge current
80 A
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Module 24S Battery module

6450 — 64 V 50 Ah sodium-ion pack

6450 · 50 Ah · 20S · regular or heated version

Shell size
390 × 265 × 170 mm
Cell configuration
20S
Cells used
BW 60145 / DFD 60150
Chemistry
Sodium-ion (Na-ion)
Nominal voltage
64 V
Capacity
50 Ah
Voltage range
50–73 V
Charging voltage
73 ±0.2 V
Charging current
5–25 A
Maximum continuous discharge current
80 A
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Module 20S Battery module

7650 — 76 V 50 Ah sodium-ion pack

7650 · 50 Ah · 24S · regular or heated version

Shell size
453 × 265 × 170 mm
Cell configuration
24S
Cells used
BW 60145 / DFD 60150
Chemistry
Sodium-ion (Na-ion)
Nominal voltage
76.8 V
Capacity
50 Ah
Voltage range
60–87.6 V
Charging voltage
87.6 ±0.2 V
Charging current
5–25 A
Maximum continuous discharge current
80 A
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Module 24S Battery module

6450 — 64 V 50 Ah sodium-ion pack, module type

6450m · 50 Ah · 20S · regular or heated version

Pack size
410 × 230 × 170 mm
Cell configuration
20S
Cells used
BW 60145 / DFD 60150
Cell type
Sodium-ion (Na-ion)
Nominal voltage
64 V
Capacity
50 Ah
Energy
3.2 kWh
Voltage range
50–73 V
Charging voltage
73 ±0.2 V
Charging current
5–25 A
Maximum continuous discharge current
80 A
Motor
≤ 2000 W
Weight
21.5 ±1 kg
Operating temperature
−30 to +55 °C
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Manufacturing
Plastic case with CCS module
Module 20S Battery module

7650 — 76 V 50 Ah sodium-ion pack, module type

7650m · 50 Ah · 24S · regular or heated version

Pack size
460 × 230 × 170 mm
Cell configuration
24S
Cells used
BW 60145 / DFD 60150
Cell type
Sodium-ion (Na-ion)
Nominal voltage
76.8 V
Capacity
50 Ah
Energy
3.84 kWh
Voltage range
60–87.6 V
Charging voltage
87.6 ±0.2 V
Charging current
5–25 A
Maximum continuous discharge current
80 A
Motor
≤ 2000 W
Weight
23.5 ±1 kg
Operating temperature
−30 to +55 °C
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Manufacturing
Plastic case with CCS module
Module 24S Battery module

64100 — 64 V 100 Ah sodium-ion pack

64100 · 100 Ah · 20S · regular or heated version

Pack size
540 × 296 × 200 mm (without handle)
Cell configuration
20S
Cells used
BW 60145 / DFD 60150
Cell type
Sodium-ion (Na-ion)
Nominal voltage
64 V
Capacity
100 Ah
Energy
6.4 kWh
Voltage range
50–73 V
Charging voltage
72 ±0.5 V
Charging current
5–50 A
Maximum continuous discharge current
100 A
Motor
≤ 3000 W
Weight
47.5 ±1 kg
Operating temperature
−30 to +55 °C
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Manufacturing
Sheet-metal case
Module 20S Battery module

76100 — 76 V 100 Ah sodium-ion pack

76100 · 100 Ah · 24S · regular or heated version

Pack size
570 × 330 × 220 mm (without handle)
Cell configuration
24S
Cells used
BW 60145 / DFD 60150
Cell type
Sodium-ion (Na-ion)
Nominal voltage
76.8 V
Capacity
100 Ah
Energy
7.68 kWh
Voltage range
60–87.6 V
Charging voltage
85 ±0.5 V
Charging current
5–50 A
Maximum continuous discharge current
100 A
Motor
≤ 3000 W
Weight
61.5 ±1 kg
Operating temperature
−30 to +55 °C
Shell material
Cold-rolled steel (SPCC)
IP grade
IP54
Manufacturing
Sheet-metal case
Module 24S Battery module