Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Batteries / By Application / Electric vehicles / Three-wheelers / 6430 — 64 V 30 Ah sodium-ion pack, module type
6430m pack

6430 — 64 V 30 Ah sodium-ion pack, module type

Brand: Polytone
Part number: 6430M
Voltage range: 50–73 V
Capacity: 30 Ah
Maximum continuous discharge current: 80 A
Shell size: 390 × 265 × 170 mm
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

The 6430M pack: 64 V, 30 Ah in sodium-ion cells, built for two- and three-wheel EVs.

Specification

  • Cell configuration: 20S
  • Shell size: 390 × 265 × 170 mm
  • Voltage range: 50–73 V
  • Maximum continuous discharge current: 80 A
  • Charging voltage: 73 ±0.2 V
  • Charging current: 5–25 A
  • Shell material: Cold-rolled steel (SPCC)
  • IP grade: IP54
  • Cells used: BW 60145 / DFD 60150
  • Chemistry: Sodium-ion (Na-ion)
  • Model: 6430m
  • Nominal voltage: 64 V
  • Capacity: 30 Ah
  • Energy: 1.92 kWh

Why sodium-ion

Sodium-ion keeps its capacity down to −30 °C, tolerates a deep discharge without the pack going flat for good, and does not rely on lithium or cobalt. For a vehicle that sits outside overnight it is the chemistry that still starts in the morning.

Battery module

Battery module

What it is for

Drop-in replacement for lead-acid packs in the same voltage class. Tell us the controller current and the connector you use and we will confirm the BMS setting and the harness before you order.

Specification

6430 — 64 V 30 Ah sodium-ion pack, module type — specification
Cell configuration20S
Shell size390 × 265 × 170 mm
Voltage range50–73 V
Maximum continuous discharge current80 A
Charging voltage73 ±0.2 V
Charging current5–25 A
Shell materialCold-rolled steel (SPCC)
IP gradeIP54
Cells usedBW 60145 / DFD 60150
ChemistrySodium-ion (Na-ion)
Nominal voltage64 V
Capacity30 Ah
Energy1.92 kWh

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What voltage and capacity does this come in?

64 V nominal, 30 Ah capacity, 1.92 kWh of energy. The figures are the ones on the specification table on this page, not a range across the family.

What continuous current can it take?

80 A. Size the cable and the busbar to this current with margin, and check that the BMS in your build is rated at least as high.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote