Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →

Emergency Lighting Battery — Sodium-ion Exit and Escape Packs

Home / News and Blog / Emergency Lighting Battery — Sodium-ion Exit and Escape Packs
Emergency Lighting Battery — Sodium-ion Exit and Escape Packs
16 Nov 2026

An emergency light is a battery that must work on the one day it is needed, after years of doing nothing. Most failures are discovered during the annual test, which is the worst possible time.

1–3 hrequired runtime
3–20 Ahsingle-luminaire packs
Floatyears at full charge, not cycling
Self-testwhere the reliability comes from

What the system needs

System Runtime Pack
Exit sign, single lamp 1–3 h 12 V 3–7 Ah
Escape route luminaire 1–3 h 12 V 7–20 Ah
Central battery system 1–3 h 24 V / 48 V bank

How to size the pack

1. Load. A 3 W LED luminaire at 12 V draws 0.25 A; three hours is 0.75 Ah. Add the inverter or driver losses.

2. Rule margin. Standards typically require 1.5× the calculated capacity to allow for ageing — that margin is what still works in year four.

3. Temperature. A luminaire in a hot ceiling void runs warmer than the room. Derate for the void, not the room.

Float duty, not cycling

These packs sit at float for years. What matters is calendar life at the cabinet temperature and the pack’s ability to deliver rated runtime after that idle period. A pack that has silently lost a third of its capacity still lights the lamp — just not for three hours.

Self-test and reporting

Modern systems self-test monthly and report failures. The battery has to support that: a BMS that reports state of health lets a maintenance team replace before the annual test rather than after a failed one.

Where it does not pay

Small exit signs. A cheap replaceable block does the job; the economics do not change.

A building with a compliant central system. Replacement is planned, and the saving is in avoided shutdowns rather than in the pack.

Questions buyers ask

Is sodium suitable for a central battery system?

Yes, and that is where the economics work: fewer planned shutdowns and a longer replacement interval.

Will the existing charger work?

Only if its float voltage matches the pack. Most emergency chargers are fixed; a mismatch shortens life.

Does it need a self-test function?

The BMS should support it. Regulatory testing is monthly or annual depending on the standard.

How long will it last at float?

Calendar life at the cabinet temperature. A hot void costs more life than a cool corridor.

Where to go next

Products for this application

Lead-acid replacement 78 models · specs and sizes ZB-1204 12.8 V 4 Ah lead-acid replacement battery single product · full specification

Have a specification question this article does not answer? Send it with the numbers you already have.

Request a quote

Part of

More guides in this group