
Cylindrical cells are standardised by size, and the size quietly decides what the product can be. A tour through three products shows how the choice is made in practice.
A power tool: 18650
An 18650 sodium cell holds under 1 Ah, which sounds useless until you look at the rate. High-rate variants deliver tens of amps for seconds, which is exactly what a drill or a trimmer needs.
The pack is small, the cell is cheap, and the holder is a standard moulding. Nobody buying a drill cares about Wh/kg; they care that it does not die in the cold and charges in twenty minutes.
A two-wheeler: 32140
The 32140 size — 32 mm diameter, 140 mm tall — became the workhorse of light electric vehicles because it sits between capacity and cost: around 10 Ah per cell in sodium, with a format that packs into a scooter bay without a custom holder.
A 48 V pack is 15 or 16 cells in series; parallel strings set the capacity. The arithmetic is simple and the mechanical design is standard, which is why this size dominates that market.
A light EV or a large module: 46145
At 46 mm diameter and 145 mm tall, this cell holds two to three times the capacity of a 32140. Fewer cells per pack means fewer welds and simpler busbars — the reason larger formats appear as packs grow.
The trade is thermal: a bigger cell has more heat to move out of a smaller surface. At high continuous rate the cooling path has to be designed, not assumed.
The rule of thumb
Choose the smallest cell that keeps the part count manageable, then check the rate and the thermal path at that size. If the pack needs more than a few hundred cells, move up a format before you move up the labour cost.
All three sizes exist in sodium because the products exist — not because one is technically superior.
Three sizes, three sets of numbers
A 0.9 Ah 18650 charges to 3.7 V and gives 1,000 cycles to 85% at 1C. A 10 Ah 32140 charges to 4.0 V at 0.5C, discharges to 1.5 V, and ships with a full SOC-OCV table for BMS work. An 18 Ah 46145 charges to 4.0 V and reaches 3,000 cycles at 0.5C. The nominal voltage differs between them — 3.0 V on the 32140 and 46145 — which changes how many cells a “48 V” pack actually needs.
Where to go next
Questions we get asked about this
Is 32140 the standard for two-wheelers?
It is the most common sodium format in that market because it balances capacity per cell against holder cost.
Can 18650 cells be used for vehicle traction?
Yes, in large parallel strings, but the part count and weld count grow quickly. Larger formats are usually cheaper at pack level.
Do cylindrical cells need cooling?
At moderate rate, air through the holder gaps is enough. Above roughly 1C continuous, a designed thermal path is needed.

