
A caravan mover draws a hard, short current: two motors pulling a tonne and a half up a ramp. Then the battery sits for months. Both ends of that duty are where lead-acid fails.
What a mover draws
| Operation | Current | Duration |
|---|---|---|
| Mover, single axle | 60–80 A | 1–3 min |
| Mover, twin axle | 80–120 A | 2–4 min |
| Pitching up a slope | Up to 150 A | Seconds |
A 100 Ah pack delivering 100 A is a 1C discharge — ordinary for sodium, hard on a small AGM block. That is the reason movers and small leisure batteries are a poor match.
Winter storage
A caravan battery left in a cold shed for five months loses capacity if it is lead-acid. Sodium holds charge and does not sulphate, so the first trip of the season does not begin with a flat battery.
Charging on site
Caravan chargers are usually simple 12 V units set for lead-acid. On a sodium pack they need a profile that reaches the correct absorption voltage and stops — many older units cannot, and the replacement is part of the job.
Where it does not pay
If the van stays on a seasonal pitch with a permanent hook-up, the battery is a small buffer and does not need cycle life. Tourers who move weekly and store outdoors see the benefit.

