
An ATV battery does two jobs: it starts the engine at −25 °C and it runs a winch at 200 A. Lead-acid does the first badly and the second with a voltage sag.
What the machine draws
| Load | Current | Duration |
|---|---|---|
| Engine crank, 500–800 cc | 150–250 A | 2–4 s |
| Winch, 3,000–4,000 lb | 150–250 A | 30 s – 2 min |
| Accessories (lights, GPS) | 5–15 A | Hours |
Brands in this space: Polaris, Can-Am, Honda, Yamaha, Arctic Cat. Fitment is usually Group U1 or a specific OEM footprint; the terminal layout decides whether a drop-in is possible.
How to size the pack
1. Start current. Take the engine’s cold cranking requirement, not the warm figure. A 700 cc twin can ask for 250 A at −20 °C.
2. Winch draw. Add the winch if it runs from the same battery. Recovery use is heavy and long compared with cranking.
3. Reserve. Accessories with the engine off need capacity, not current. A 20 Ah pack covers lights and GPS for a day; a winch-heavy recovery day needs more.
Cold starting
At −25 °C a lead-acid block delivers roughly half its rated cranking current. Sodium loses less, and the voltage holds better under the short heavy load — which is what actually turns the engine.
Where sodium is not the answer
Machines left for months with a parasitic draw. Any pack will be flat; a maintainer is the answer, not a chemistry.
A small stator with a fixed regulator. Check the top voltage against the pack window before fitting.
Questions buyers ask
Will it fit a U1 tray?
U1 and U1R are standard footprints; check terminal position and hold-down height against the tray.
Can the winch run from the same battery?
Yes, but size for the winch duty. Recovery use is minutes at 200 A, which is what separates a starting battery from an accessory battery.
Does it need a special charger?
A charger with a suitable profile, or the vehicle’s own charging system if the voltage window matches.
Will it survive being stored outside?
Yes, at partial charge. Cold does not damage a sodium pack at rest.

