Safe, reliable and long-livedA sealed outdoor cabinet with cell-level protection, rated for a long service life.
Standardised modular designModules are interchangeable, so a service visit swaps a block rather than a whole cabinet.
Dual charge / discharge controlTwo independent control paths keep the pack inside its limits under load and under charge.
Parallel operationCabinets run in parallel to add capacity or power without redesigning the system.
PV and generator inputTakes a solar array or a genset, and shifts between them as the site demand changes.
High-voltage battery, LCD displayA higher DC voltage means lower current losses, with the state shown on the front panel.
100% unbalanced outputCarries a fully unbalanced three-phase load, which matters where single-phase demand dominates.
Efficient O&MRemote monitoring and modular parts cut the time and the cost of every maintenance visit.
Specification
PV power
120 kW × 4
Rated MPPT voltage range
600–900 V
Maximum input current
200 A × 4
Output power
500 kVA
Maximum output power
550 kVA
Output AC voltage
400 / 230 V
Maximum output current
796.4 A
Current harmonics
<3% (≥30% load)
Power factor
−1 to 1
PCS dimensions (W×D×H)
1350 × 800 × 2200 mm
Battery
819.2 V / 314 Ah × 4 / 1028 kWh
Battery clusters
4
Charging temperature
0 to +55 °C
Discharging temperature
−20 to +60 °C
Communication
WiFi
Protection class
IP54
Weight
about 16 t
System dimensions (W×D×H)
6058 × 2438 × 2896 mm
Rated power
500 kVA
Rated energy
1028 kWh
Battery voltage
819.2 V
Battery capacity
314 Ah × 4
System dimensions
6058 × 2438 × 2896 mm
System weight
about 16 t
Ordering: MOQ and lead time
These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.
Minimum order quantity
Sample evaluation
1 unitA single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item
5–10 unitsThe stocked line: cells, cases and components that need no change before shipping.
New ODM design
100–200 setsNew structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project
quoted per projectContainer-scale and framework agreements are quoted against the schedule, not against a unit price.
Production lead time
Stock item
3–5 working daysShipped from stock once the order is confirmed.
OEM (silk print, label, packaging only)
15–20 working daysSame structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric)
30–35 working daysCounted from specification freeze, not from the enquiry.
Adding a certification
+15–30 daysOn top of the production time above. The laboratory sets the schedule, not us.
Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.
Questions buyers ask
What are the dimensions?
1350 × 800 × 2200 mm. Check the mounting space against this figure rather than against the catalogue photo, because the enclosure adds wall thickness on every side.
How much does it weigh?
about 16 t. For freight the packed weight is higher: crating and pallet add to this figure, so ask for the shipping weight when you book.
We use one first-party cookie to remember your language and consent choices. No advertising or cross-site tracking is loaded unless you accept analytics. Read the privacy notice.