Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / BMS / 3S 100 A BMS — separate port, NCM thresholds, 87 × 35 × 8 mm
4S 100 A separate-port BMS board with aluminium heat plate

3S 100 A BMS — separate port, NCM thresholds, 87 × 35 × 8 mm

Brand: Polytone
Part number: PT-BMS-3S100-SP
Charge voltage: 12.6 V
Discharge current: 100 A
Size: 87 × 35 × 8 mm
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Slim 3S protection board, 87 × 35 × 8 mm, 100 A discharge on a separate port with a 12.6 V charge path. Thresholds are the ternary (NCM) set: 4.28 V over-charge, 2.55 V over-discharge, balancing from 4.18 V.

Main circuit resistance ≤ 25 mΩ — the figure that decides how warm the board runs at 100 A.

Used on: the same 12 V applications — e-bikes, tricycles, low-speed EVs, storage and solar inverters — where a 3S ternary pack is fitted.

Specification

3S 100 A BMS — separate port, NCM thresholds, 87 × 35 × 8 mm — specification
Configuration3S (12 V)
Size87 × 35 × 8 mm
Discharge current100 A
Charge current100 A (separate port)
Charge voltage12.6 V
Main circuit resistance≤ 25 mΩ
Over-charge detect4.28 ± 0.05 V
Over-charge delay0.5 s
Over-charge release4.08 ± 0.1 V
Balance start4.18 ± 0.05 V
Balance current30 ± 5 mA
Over-discharge detect2.55 ± 0.1 V
Over-discharge delay0.1 s
Over-discharge release3.0 ± 0.1 V
Over-discharge current200 ± 30 A, 9 ms delay
Short circuit250 µs, release by disconnecting the load
Standby current< 50 µA
Operating temperature-30 to +80 °C
ApplicationE-bike, tricycle, low-speed EV, storage, solar inverter

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What are the dimensions?

87 × 35 × 8 mm. Check the mounting space against this figure rather than against the catalogue photo, because the enclosure adds wall thickness on every side.

What temperature range does it operate in?

-30 to +80 °C. That is the discharge window. Charging has its own limits, and the BMS thresholds have to match the cell data rather than a generic default.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote