Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / Anode Materials / Sodium Metal Foil / Sodium metal chip — pure sodium, 0.45 mm
Sodium metal chip — pure sodium, 0.45 mm

Sodium metal chip — pure sodium, 0.45 mm

Brand: Polytone
Part number: PT-SM-PURE
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Four-layer sodium metal chip for sodium-ion research cells: clear protective film, sodium, current collector (aluminium or copper), blue protective film. Cut to a fixed diameter so every disc matches no hand-cut burrs, no short circuits from edge slivers.

No current collector as a reference electrode or where you press the chip onto your own substrate.

Storage: vacuum sealed under argon, then plastic bottle, aluminium bag and tin can four layers of protection so the sodium stays bright for months.

How to use

  1. Open the argon-filled can (< 2% RH) outside the glove box, move the vacuum bag inside, then open it and take out the chips you need. Reseal.
  2. Peel the protective films from both faces before use. The backing side carries a blue film; the sodium side a clear film so you can inspect it.
  3. Remove the blue film first, then the clear film, holding the whole chip with wide flat tweezers so the foil does not deform.
  4. Lift the edge with stainless tweezers or a coin, peel the rest, and press the chip into the cell backing against the case, sodium towards the separator.

Specification

Sodium metal chip — pure sodium, 0.45 mm — specification
MaterialSodium metal, 99.73% purity
BackingNone
Sodium thickness450 µm
Diameter8 / 10 / 12 / 14 / 15.6 / 18 mm (custom)
Thickness range0.1 – 1.0 mm (custom)
Packaging50 / 100 / 200 / 400 pcs per bottle
StorageVacuum sealed under argon, < 2% RH
ApplicationCoin-cell and pouch research cells

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote