Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / Cathode Materials / Prussian Blue / Prussian white cathode powder — Na2MnFe(CN)6
Prussian white cathode powder — Na2MnFe(CN)6

Prussian white cathode powder — Na2MnFe(CN)6

Brand: Polytone
Part number: PT-CAT-PB-MN
Voltage window: 2.0 – 3.8 V (vs Na/Na+)
Capacity 0.1C: ≥ 120 mAh/g (2.0–3.8 V vs Na)
Availability: Sample available
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Prussian white (Na2MnFe(CN)6) cathode powder for sodium-ion cells. Open framework structure built from cheap iron and manganese, with a high theoretical capacity and a wide operating window — the low-cost route for storage and entry-level cells.

Caveat to plan for: the powder is hygroscopic and must stay sealed; open a container only when you are ready to use it, or handle it in a glove box.

Specifications

Chemical formula Na2MnFe(CN)6
Structure Prussian white (open framework)
Appearance Fine white powder
D10 / D50 / D90 3.8 / 13.2 / 31.5 µm
BET surface area ≤ 25 m²/g
pH 8.34
Capacity 0.1C ≥ 120 mAh/g (2.0–3.8 V vs Na)
Capacity 0.2C ~130 mAh/g
Capacity 2C 118 mAh/g
Cycling 67.7% retention after 300 cycles at 4C
Voltage window 2.0 – 3.8 V (vs Na/Na+)
Handling Hygroscopic — seal, room temperature, glove box
Transport Non-flammable solid

Specification

Prussian white cathode powder — Na2MnFe(CN)6 — specification
Chemical formulaNa2MnFe(CN)6
StructurePrussian white (open framework)
AppearanceFine white powder
D10 / D50 / D903.8 / 13.2 / 31.5 µm
BET surface area≤ 25 m²/g
pH8.34
Capacity 0.1C≥ 120 mAh/g (2.0–3.8 V vs Na)
Capacity 0.2C~130 mAh/g
Capacity 2C118 mAh/g
Cycling67.7% retention after 300 cycles at 4C
Voltage window2.0 – 3.8 V (vs Na/Na+)
HandlingHygroscopic — seal, room temperature, glove box
TransportNon-flammable solid

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote