Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Cases / Housings & Brackets / Plastic module end plate — 175 × 135 × 25 mm
Plastic module end plate — 175 × 135 × 25 mm

Plastic module end plate — 175 × 135 × 25 mm

Brand: Polytone
Part number: PT-ST-EP280
Size: 175 × 135 × 25 mm
Availability: Made to order
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Moulded end plate that closes a prismatic module. The ribbed back face carries the compression load, the front face takes the terminal hardware — the plate is what stops a module from bulging once the cells start to swell.

Material: ABS with a flame-retardant package, black. SGS tested for flame retardancy.

Design details that matter:

  • Rib grid on the inner face — stiffness without adding wall thickness, so the plate holds compression without cracking.
  • Moulded bosses and through-holes for the tie rods, matched to the module stack height.
  • Recesses for the terminal posts and busbar exits on the outer face.

Custom: built for 280 Ah prismatic cells; dimensions, rib layout and terminal cut-outs can be made to your module drawing. Tooling quoted separately.

Specification

Plastic module end plate — 175 × 135 × 25 mm — specification
MaterialABS + flame retardant
ColourBlack
Size175 × 135 × 25 mm
CertificationSGS
Flame ratingHigh flame retardancy
Cell format280 Ah prismatic module
CustomisationDimensions, ribs and cut-outs to drawing

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What are the dimensions?

175 × 135 × 25 mm. Check the mounting space against this figure rather than against the catalogue photo, because the enclosure adds wall thickness on every side.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote