Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / Structural Parts / Insulation Boards / PC insulation gasket — die-cut, flame retardant
Die-cut PC insulation gaskets for sodium-ion packs

PC insulation gasket — die-cut, flame retardant

Brand: Polytone
Part number: PT-ST-PCG
Availability: Made to order
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Die-cut polycarbonate gaskets that sit between the cells, the PCB and the enclosure of a sodium-ion pack. The job is simple and it is the one that causes fires when it is skipped: stop the positive terminal, the busbar or the board from touching the case.

Why PC rather than PET or PVC:

  • High dielectric strength — holds off the pack voltage across a thin sheet.
  • Tough and tear-resistant: it can be folded and creased to follow a shaped housing without cracking, and survives repeated bending.
  • Wide service temperature — does not warp or shrink in the hot spots inside a running pack, so the cut-out stays on the boss it was designed for.
  • Flame retardant grade, so a local arc does not turn the gasket into fuel.

Adhesive options: plain, single-sided tape or double-sided tape — the taped versions hold the gasket in place during assembly so it cannot slip under a busbar.

Made to drawing: send a DXF or PDF with the outline, cut-outs and thickness; we quote per piece. Small batches for prototypes are accepted.

Specification

PC insulation gasket — die-cut, flame retardant — specification
MaterialPolycarbonate (PC), flame retardant
FunctionCell / PCB / enclosure isolation
PropertiesHigh dielectric strength, tear resistant, foldable
TemperatureWide service range, low warpage
AdhesivePlain / single-sided tape / double-sided tape
ProcessingDie-cut to drawing
ThicknessTo drawing
DeliveryMade to order, prototypes accepted

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote