Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Cells / Pouch Cells / Sodium-ion Pouch Cell, 20 Ah, MR20A
Sodium-ion pouch cell

Sodium-ion Pouch Cell, 20 Ah, MR20A

Brand: Polytone
Part number: MR20A
Capacity: 20 Ah
Continuous charge: 1C continuous charge and discharge
Cycle life at 25 °C: ≥3,000 cycles
Weight: 0.53 ±0.02 kg
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

20 Ah sodium-ion pouch cell for two- and three-wheel electric motorcycles, In production. Layered oxide / hard carbon, 0.53 ±0.02 kg.

Specification

  • Model: MR20A
  • Status: In production
  • Chemistry: Sodium-ion (Na-ion)
  • Cathode material: Layered oxide / hard carbon
  • Form: Pouch
  • Nominal capacity: 20 Ah
  • Cell dimensions: 88 × 159 × 235 mm (88159235)
  • Weight: 0.53 ±0.02 kg
  • AC internal resistance: ≤0.9 mΩ
  • DC internal resistance: ≤1.8 mΩ
  • Energy density: ≥115 Wh/kg
  • Volumetric density: ≥180 Wh/L
  • Cycle life at 25 °C: ≥3,000 cycles
  • Cycle life at 45 °C: ≥1,500 cycles
  • Continuous charge: 1C continuous charge and discharge
  • Application: Two- and three-wheel electric motorcycles
  • Standard: GB 43854-2024 — safety technical specification for batteries used in electric bicycles

Why this cell

  • High specific energy. ≥115 Wh/kg and ≥180 Wh/L, so a 60 V 20 Ah pack stays light enough to lift out of the frame.
  • Fast charge. Rated for 1C continuous charge and discharge, which is what a two-wheel pack needs to come back to full between shifts.
  • Wide temperature range. Keeps usable capacity in the cold and does not need a heated enclosure to charge.
  • Standard. Tested to GB 43854-2024, the safety technical specification for batteries used in electric bicycles.

Where it goes

Two- and three-wheel motorcycle packs, 48 V to 76 V, series or parallel as the frame allows. Tell us the pack voltage and the connector and we will confirm the BMS and the layout.

Specification

Sodium-ion Pouch Cell, 20 Ah, MR20A — specification
Capacity20 Ah
StatusIn production
ChemistrySodium-ion (Na-ion)
Cathode materialLayered oxide / hard carbon
FormPouch
Nominal capacity20 Ah
Cell dimensions88 × 159 × 235 mm (88159235)
Weight0.53 ±0.02 kg
AC internal resistance≤0.9 mΩ
DC internal resistance≤1.8 mΩ
Energy density≥115 Wh/kg
Volumetric density≥180 Wh/L
Cycle life at 25 °C≥3,000 cycles
Cycle life at 45 °C≥1,500 cycles
Continuous charge1C continuous charge and discharge
ApplicationTwo- and three-wheel electric motorcycles
StandardGB 43854-2024 — safety technical specification for batteries used in electric bicycles

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What voltage and capacity does this come in?

20 Ah capacity, ≥115 Wh/kg of energy. The figures are the ones on the specification table on this page, not a range across the family.

What are the dimensions?

88 × 159 × 235 mm (88159235). Check the mounting space against this figure rather than against the catalogue photo, because the enclosure adds wall thickness on every side.

How much does it weigh?

0.53 ±0.02 kg. For freight the packed weight is higher: crating and pallet add to this figure, so ask for the shipping weight when you book.

What cycle life is quoted?

≥3,000 cycles. A cycle figure only means something with its rate, temperature and end-of-life criterion, which is why we quote the condition next to the number instead of a bare count.

What continuous current can it take?

1C continuous charge and discharge. Size the cable and the busbar to this current with margin, and check that the BMS in your build is rated at least as high.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote