Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / Insulation & Thermal / High-silica glass fibre insulation blanket, 4–25 mm
High silica glass fibre insulation blanket, 94-96% SiO2

High-silica glass fibre insulation blanket, 4–25 mm

Brand: Polytone
Part number: PT-IT-HSILICA
Continuous use: 1000 °C
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Needled silica blanket, 94–96% SiO₂, supplied as a roll. The silica content is what sets it apart: it takes about 400 °C more than ordinary glass fibre, so it keeps working where E-glass has already softened.

Temperature: softening point close to 1700 °C, rated for continuous service at 1000 °C — the grade used around a furnace door, a flue or a battery pack that has to survive a fire test.

Physical: 4–25 mm thick, 130–180 kg/m³, white, needled rather than woven so it stays together when cut.

Widths: 1000 mm, 1050 mm and 1200 mm standard; 1500–2000 mm made to order.

Also: acid and alkali resistant, corrosion resistant, rot and insect proof — it does not degrade the way a mineral wool blanket does in a damp enclosure.

Specification

High-silica glass fibre insulation blanket, 4–25 mm — specification
FormNeedled blanket, roll
SiO₂ content94 – 96%
Fibre diameter9 µm ± 2
ColourWhite
Thickness4 – 25 mm
Density130 – 180 kg/m³
Width1000 / 1050 / 1200 mm (1500–2000 mm on request)
Softening point≈ 1700 °C
Continuous use1000 °C
ChemicalAcid and alkali resistant, corrosion resistant
DurabilityRot, insect and mildew proof
ApplicationFurnace, flue and fire-barrier insulation

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What continuous current can it take?

1000 °C. Size the cable and the busbar to this current with margin, and check that the BMS in your build is rated at least as high.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote