Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / Anode Materials / Hard Carbon / Hard carbon anode powder — spherical grade CL23-SP
Hard carbon anode powder — irregular grade CL23-IR

Hard carbon anode powder — spherical grade CL23-SP

Brand: Polytone
Part number: PT-AN-HC-CL23-SP
Reversible capacity: 283 mAh/g (nominal 250–300)
Availability: Sample available
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Engineered hard carbon for sodium-ion and specialty lithium-ion cells. The structure is built with a widened interlayer spacing, which is what lets it take the larger sodium ion without the strain that graphite suffers.

CL23-SP — High sphericity: Spherical grade for slurry rheology, uniform coating and a higher first-cycle efficiency — the one to specify once the electrode process is fixed.

Carbon content up to 99.95% and moisture held at 0.02%, so parasitic reactions with the non-aqueous electrolyte stay low and SEI formation is repeatable.

Specifications

Chemical formula C
Particle shape High sphericity
D10 / D50 / D90 5 / 10 / 27 µm
Moisture 0.02%
Carbon content 99.95%
Reversible capacity 283 mAh/g (nominal 250–300)
First coulombic efficiency 85.0%
Use Li-ion and Na-ion anode

Specification

Hard carbon anode powder — spherical grade CL23-SP — specification
Chemical formulaC
Particle shapeHigh sphericity
D10 / D50 / D905 / 10 / 27 µm
Moisture0.02%
Carbon content99.95%
Reversible capacity283 mAh/g (nominal 250–300)
First coulombic efficiency85.0%
UseLi-ion and Na-ion anode

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote