Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / Structural Parts / Insulation Boards / Epoxy board — insulation and puncture-resistant separator
Epoxy board — insulation and puncture-resistant separator

Epoxy board — insulation and puncture-resistant separator

Brand: Polytone
Part number: PT-ST-EPOXY
Availability: Made to order
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Epoxy glass laminate used as the separator plate between modules and as the puncture-resistant barrier around a sodium-ion pack. It is rigid, electrically insulating and does not creep under compression — the reason it is preferred over plastic film where a cell edge could rub through.

Made to your drawing: cut to size, cut to a custom outline, drilled, tapped and counter-bored. Slots, windows and relief cut-outs are all machined, not punched, so the edge stays clean.

Epoxy board cut and drilled

Frame and spacer assemblies — plates can be supplied drilled to match your module posts, with the spacer height held to your tolerance.

Epoxy board frame assembly

Cut-outs and reliefs — openings for busbars, vents or terminals are machined to drawing.

Epoxy board with cut-outs

Custom outlines — stepped and notched profiles for tight pack envelopes.

Epoxy board custom profile

Ordering: send a 2D drawing (DXF/PDF) with thickness, grade and hole callouts; we quote per piece including machining.

Specification

Epoxy board — insulation and puncture-resistant separator — specification
MaterialEpoxy glass laminate
ColourYellow
FunctionModule separator, puncture-resistant insulation
ProcessingCut to size, custom outline, drilled, tapped, counter-bored
ThicknessTo drawing
DeliveryMade to order
ApplicationSodium-ion pack and module insulation

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote