Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / Carbon Paper (GDL) / Carbon paper PT-CP-030 — 0.11 mm gas diffusion layer
Carbon paper PT-CP-030 — 0.11 mm gas diffusion layer

Carbon paper PT-CP-030 — 0.11 mm gas diffusion layer

Brand: Polytone
Part number: PT-CP-030
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Carbon paper for battery and fuel-cell lab work — a porous, conductive sheet used as a gas diffusion layer and as a conductive substrate in test cells.

PT-CP-030 (TGP-H-030): 0.11 mm thick, 5% PTFE (hydrophobic). Thicker sheets carry more current but restrict gas flow — pick the thickness that matches your flow field and clamping pressure.

Hydrophilic grade: PT-CP-060 is supplied without hydrophobic treatment for aqueous and battery lab use; a 20% PTFE version is available on request.

Specification

Carbon paper PT-CP-030 — 0.11 mm gas diffusion layer — specification
Product codePT-CP-030
Equivalent modelTGP-H-030
Thickness0.11 mm
Surface treatment5% PTFE (hydrophobic)
Bulk density0.40 g/cm³
Porosity80%
Surface roughness8 µm
Gas permeability2500 mm·ml/(cm²·h·mmH₂O)
Resistivity (through-plane)80 mΩ·cm
Resistivity (in-plane)—
Thermal conductivity (through-plane)—
Thermal conductivity (in-plane)—
Thermal expansion−0.8 ×10⁻⁶ /°C (25–100 °C)
Flexural strength40 MPa
Flexural modulus8 GPa
Tensile strength—
ApplicationBattery lab research, gas diffusion layer

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote