Cell monitoring slave board for a 12S series pack, built around the LTC6811. It measures every cell, balances them, reads four temperature sensors and reports back over ISOSPI to the main board.
Not just voltage: the board also reports cell internal resistance and pack capacity, so a pack that is ageing is visible before it fails.
Stacking: boards chain on the ISOSPI bus (PA / PB in, PA / PB out), so one main board can serve a 12S, 15S or 18S string per slave and several slaves per pack.
Chemistry: the LTC6811 measures voltage, not chemistry — the same board works on sodium-ion, Li-ion, LFP or LTO, with the thresholds set in the main board.

Connections: 12-pin cell harness, 4-pin temperature harness, ISOSPI in / out, and a power input from the pack.
Variants
The same 100 × 60 × 7.7 mm board is built in three cell counts. Order the one that matches the string in the pack — the connectors, the ISOSPI chain and the balancing current are identical:
- 12S series — monitors 12 cells in series, for 36 V / 38.4 V packs
- 15S series — monitors 15 cells in series, for 48 V / 51.2 V packs
- 18S series — monitors 18 cells in series, for 57.6 V / 60 V packs
Tell us the cell count and the chemistry (sodium-ion, Li-ion, LFP or LTO) when you ask for a quote.
Datasheet, declarations and warranty terms for this model.
Open datasheet (print or save as PDF) →
Declaration of conformity and warranty statement are issued with the order. Ask for the current revision if your design is already frozen.