Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / Conductive Parts / Busbars & Nickel Sheet / Aluminium-nickel composite busbar
Aluminium-nickel composite busbar

Aluminium-nickel composite busbar

Brand: Polytone
Part number: BB-ALNI
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

An aluminium-nickel composite busbar: aluminium for weight, a nickel face for the weld. It is the part chosen when a pack is being taken out of copper for cost or mass and the tabs are still nickel-plated.

When to use it

Multi-point and structural connections where the bar itself helps to hold the module together. The composite stays weld-ready on the nickel face after storage, which a bare aluminium face does not.

Where it does not fit

Aluminium carries roughly 60% of the current of copper at the same cross-section, so a like-for-like swap needs a bigger bar. Check the space before assuming the existing copper bar can be replaced 1:1.

Specification

Aluminium-nickel composite busbar — specification
MaterialAluminium-nickel composite busbar
FeatureLightweight · weld-ready

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote