Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Cases / Housings & Brackets / Aluminium module end plate — 6063-T5 extrusion
Aluminium module end plate pair

Aluminium module end plate — 6063-T5 extrusion

Brand: Polytone
Part number: PT-ST-ALEP
Stock sizes: 169.5 × 175 × 19.5 mm · 105 × 201 × 21 mm · 195 × 201 × 21 mm · 85 × 299 × 20 mm · 100 × 330 × 10 mm · 83 × 362 × 20 mm · 175 × 362 × 20 mm · 83 × 405 × 20 mm · 175 × 405 × 20 mm · 83 × 444 × 16 mm · 175 × 405 × 16 mm
Availability: In stock / made to order
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Extruded aluminium end plate that clamps a module of large-format prismatic cells. The hollow-rib section is what gives it stiffness at low weight — a 405 mm plate holds compression across a 280–320 Ah cell stack without bowing.

Alloy: 6063-T5 extrusion (6061 on request). Finish: mill, brushed, alkali washed or anodised — anodising is the usual choice where the plate is also the visible surface of the pack.

Made for: 280 / 302 / 312 / 320 Ah prismatic cells, residential and C&I storage racks, and EV pack modules.

Aluminium end plate extrusion

Hollow-rib section — the profile is extruded, then cut to length, machined and drilled, so the rib spacing stays constant along the whole plate.

Aluminium end plates

Assembled — plates can be supplied with the tie rods, brackets and mounting holes matched to your module drawing.

Aluminium end plate assembly

Stock sizes (L × W × T)

169.5 × 175 × 19.5 mm
105 × 201 × 21 mm
195 × 201 × 21 mm
85 × 299 × 20 mm
100 × 330 × 10 mm
83 × 362 × 20 mm
175 × 362 × 20 mm
83 × 405 × 20 mm
175 × 405 × 20 mm
83 × 444 × 16 mm
175 × 405 × 16 mm

Other lengths, widths and thicknesses are made to order — send the drawing and the cell format.

Specification

Aluminium module end plate — 6063-T5 extrusion — specification
Material6063-T5 aluminium extrusion (6061 optional)
FinishMill / brushed / alkali wash / anodised
Cell format280 / 302 / 312 / 320 Ah prismatic
Stock sizes169.5 × 175 × 19.5 mm · 105 × 201 × 21 mm · 195 × 201 × 21 mm · 85 × 299 × 20 mm · 100 × 330 × 10 mm · 83 × 362 × 20 mm · 175 × 362 × 20 mm · 83 × 405 × 20 mm · 175 × 405 × 20 mm · 83 × 444 × 16 mm · 175 × 405 × 16 mm
ApplicationResidential & C&I storage, EV pack modules
CustomisationLength, width, thickness and drilling to drawing

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote