Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Cases / Aluminium Shells / Aluminium alloy battery shell — stamped, sandblasted
Stamped aluminium battery shell with sandblasted finish

Aluminium alloy battery shell — stamped, sandblasted

Brand: Polytone
Part number: PT-ST-ALU-SHL
Sizes: To drawing
Availability: Made to order
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Stamped aluminium shell for a small battery pack — the body is pressed from sheet in one piece, so there is no weld line down the corner and no filler visible after the sandblast finish.

Process: stamping → trim → CNC finishing on the openings → sandblasting → anodising (optional).

Features in the drawing: louvred vent bank on the side face, a recessed top panel for terminals and a connector opening on the lid, plus fixing holes for the internal bracket.

Finish: sandblasted as standard. Anodising, e-coat or painting can be added — the sandblast is what gives the anodised version its uniform matte look.

Made to drawing: send the 3D or 2D file with the wall thickness and alloy; tooling and sample quoted separately.

Specification

Aluminium alloy battery shell — stamped, sandblasted — specification
MaterialAluminium alloy sheet
ProcessStamping, CNC finishing, sandblasting
FinishSandblasted (anodising / e-coat / paint optional)
FeaturesLouvred vents, recessed terminal panel, connector opening
SizesTo drawing
DeliveryMade to order, samples available
ApplicationPortable battery pack enclosure

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote