Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / Insulation & Thermal / Aerogel thermal insulation — 1200 mm × 50 m roll, 0.3–2.0 mm
White aerogel thermal insulation roll for battery packs

Aerogel thermal insulation — 1200 mm × 50 m roll, 0.3–2.0 mm

Brand: Polytone
Part number: PT-IT-AERO
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

White aerogel sheet in a 1200 mm wide roll, used as the thermal and fire barrier between cells, between a pack and its enclosure, or behind a power bank shell. The conductivity is 0.016–0.020 W/(m·K) — roughly half that of still air in a thin gap, which is why a 1 mm sheet does the job of a much thicker foam pad.

Where it earns its price: a cell that goes into thermal runaway heats its neighbour through the wall between them. A V-0 aerogel sheet slows that transfer enough for the BMS to cut the pack before the second cell goes.

Thickness: 0.3 / 0.5 / 1.0 / 1.5 / 2.0 mm, tolerance ±0.2 × thickness. Quoted thickness excludes the carrier film and adhesive.

Electrical: DC 1000 V, insulation resistance above 500 MΩ at 2 mm — so the same sheet also works as a dielectric barrier.

Storage: keep dry at room temperature; 3-year shelf life in the sealed roll.

Converting: slit to width, die-cut to shape, or supplied with adhesive backing — tell us the pack drawing.

Specification

Aerogel thermal insulation — 1200 mm × 50 m roll, 0.3–2.0 mm — specification
FormatRoll, 1200 mm × 50 m
ColourWhite
Thickness0.3 / 0.5 / 1.0 / 1.5 / 2.0 mm
Thickness tolerance±0.2 × thickness (excludes carrier / adhesive)
Density24 kg/m³ (adjustable)
Thermal conductivity0.016 – 0.020 W/(m·K)
Thermal resistance0.35 m²·K/W
Flame ratingV-0
Tensile strength600 kPa
Dielectric strengthDC 1000 V, > 500 MΩ at 2 mm
Restricted substancesCompliant (GB/T 30512)
Shelf life3 years, dry storage at room temperature
Test standardsGB/T 6343, GB/T 10294, GB/T 2408, GB/T 6344, GB/T 3048.5, GB/T 30512

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote