Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Cases / Housings & Brackets / 8S 314 Ah cell bracket, type 2 — without cells
8S bracket, cell stack

8S 314 Ah cell bracket, type 2 — without cells

Brand: Polytone
Part number: PT-BRK-05
Cell size: 314 Ah prismatic
Availability: Made to order
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Compression bracket that holds a 8S stack of 314 Ah prismatic cells, with the end plates, tie rods and fixing hardware supplied together. Cells are not included — order them separately and assemble with the bracket kit.

Why a bracket and not just end plates: the bracket sets the cell pitch, keeps the stack square during assembly, and gives the BMS and busbar a fixed reference — so the pack goes together the same way every time.

Standard accessories: carry strap ×2, M6×12 screws ×4, M6×30 screws ×4, EVA foam pad ×1.

Optional parts: 580 × 200 mm insulation sheet ×2, 580 × 174 mm insulation sheet ×1, 200 × 170 mm sheet ×9, aluminium busbar ×7.

This grade: without cells.

Model reference: 8S 314 Ah cell bracket, type 2 — without cells.

Specification

8S 314 Ah cell bracket, type 2 — without cells — specification
Configuration8S
Cell size314 Ah prismatic
Cells includedNo
Standard partsCarry strap ×2, M6×12 ×4, M6×30 ×4, EVA foam ×1
Optional partsInsulation sheets, aluminium busbars
MaterialSee drawing (steel / phosphor bronze / ABS+PC options)
ApplicationSodium-ion module assembly

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote