Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / BMS / 5S 40 A BMS protection board — 88 × 34 × 2.8 mm
5S 40 A BMS protection board

5S 40 A BMS protection board — 88 × 34 × 2.8 mm

Brand: Polytone
Part number: PT-BMS-5S40
Continuous current: 40 A
Size: 88 × 34 × 2.8 mm
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Compact 5S protection board, 88 × 34 × 2.8 mm, rated 40 A. The MOSFET bank runs along one edge of the board and the balance pads sit along the other, so it drops into a slim pack without a heat sink.

Thresholds: over-charge at 4.25 V with a 4.15 V release, over-discharge at 2.7 V with a 3.0 V release, balancing from 4.25 V at 41 mA.

Over-current: trips at a 100 mV sense voltage (75 ± 5 A) after about 1 s — slow enough to ride a motor start, fast enough to protect the cells.

Short circuit: 250 µs trip, released by disconnecting the load or by applying charge.

Standby: under 40 µA working and under 10 µA asleep.

Specification

5S 40 A BMS protection board — 88 × 34 × 2.8 mm — specification
Configuration5S
Continuous current40 A
Size88 × 34 × 2.8 mm
Over-charge detect4.25 ± 0.025 V
Over-charge delay1000 ± 500 ms
Over-charge release4.15 ± 0.05 V
Balance start4.25 ± 0.025 V
Balance current41 ± 5 mA
Over-discharge detect2.7 ± 0.1 V
Over-discharge delay1000 ± 500 ms
Over-discharge release3.0 ± 0.1 V
Over-current100 mV sense, 75 ± 5 A, 1000 ± 500 ms
Short circuit250 µs, release by load disconnect or charge
Standby current≤ 40 µA working, ≤ 10 µA sleep
Operating temperature-30 to +80 °C

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What are the dimensions?

88 × 34 × 2.8 mm. Check the mounting space against this figure rather than against the catalogue photo, because the enclosure adds wall thickness on every side.

What temperature range does it operate in?

-30 to +80 °C. That is the discharge window. Charging has its own limits, and the BMS thresholds have to match the cell data rather than a generic default.

What continuous current can it take?

40 A. Size the cable and the busbar to this current with margin, and check that the BMS in your build is rated at least as high.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote