Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / BMS / 4S BMS protection board — 4S 320 A, with balancing
4S high current BMS board with heat sink

4S BMS protection board — 4S 320 A, with balancing

Brand: Polytone
Part number: PT-BMS-4S320
Discharge voltage: 14.6 V
Continuous discharge current: 4S 320 A
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

High-current 4S protection board for a 12 V sodium-ion pack, rated 4S 320 A continuous. The MOSFET bank sits under an aluminium plate, so it holds the rating instead of folding under a start-up surge.

Thresholds are set for sodium chemistry: over-charge at 3.65 V, release at 3.55 V, over-discharge at 2.3 V, release at 2.6 V, balancing from 3.60 V with a 72 mA balance current.

Protection chain: over-charge (0.2 s), over-discharge (25 ms), charge and discharge over-current (12 ms / 1 s), and a short-circuit trip that releases in 250 µs.

Temperature: charging is cut at 55 °C and discharging at 75 °C. The board draws under 25 µA at rest and under 10 µA asleep, so a stored pack does not drain itself.

Main circuit resistance under 13 mΩ — that is the figure that decides how much heat the board makes at rated current.

Specification

4S BMS protection board — 4S 320 A, with balancing — specification
Configuration4S
Continuous discharge current4S 320 A
Discharge voltage14.6 V
Charge current< 50 A
Over-charge detect3.65 ± 0.025 V
Over-charge delay0.2 s
Over-charge release3.55 ± 0.025 V
Balance start3.60 ± 0.025 V
Balance current72 mA
Over-discharge detect2.3 ± 0.025 V
Over-discharge delay0.025 s
Over-discharge release2.6 ± 0.025 V
Charge over-current320 A, 12 ms delay
Discharge over-current320 A, 1 s delay
Short-circuit release250 µs
Charge temperature cut-off55 °C
Discharge temperature cut-off75 °C
Main circuit resistance< 13 mΩ
Standby current< 25 µA (working), < 10 µA (sleep)
Operating temperature-30 to 75 °C

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What temperature range does it operate in?

75 °C. That is the discharge window. Charging has its own limits, given as 55 °C on this page, and the BMS thresholds have to match the cell data rather than a generic default.

What continuous current can it take?

4S 320 A. Size the cable and the busbar to this current with margin, and check that the BMS in your build is rated at least as high.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote