Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / BMS / 4S 100 A BMS — separate port, LFP thresholds, 87 × 35 × 8 mm
4S 100 A separate-port BMS board with aluminium heat plate

4S 100 A BMS — separate port, LFP thresholds, 87 × 35 × 8 mm

Brand: Polytone
Part number: PT-BMS-4S100-SP
Charge voltage: 14.6 V
Discharge current: 100 A
Size: 87 × 35 × 8 mm
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Slim 4S protection board, 87 × 35 × 8 mm, 100 A discharge and 100 A charge on a separate port. Thresholds are the LiFePO4 set: 3.75 V over-charge, 2.1 V over-discharge, balancing from 3.60 V.

Separate port: charge and discharge go through different terminals, so the charge path can be sized for a charger rather than for the load.

Why the aluminium plate: the MOSFET bank is clamped under it — that is what lets a board this thin carry 100 A continuously.

Used on: e-bikes, tricycles, low-speed EVs, storage packs, solar inverters and other high-power 12 V systems.

Specification

4S 100 A BMS — separate port, LFP thresholds, 87 × 35 × 8 mm — specification
Configuration4S (12 V)
Size87 × 35 × 8 mm
Discharge current100 A
Charge current100 A (separate port)
Charge voltage14.6 V
Over-charge detect3.75 ± 0.025 V
Over-charge delay0.5 s
Over-charge release3.60 ± 0.1 V
Balance start3.60 ± 0.05 V
Balance current30 ± 5 mA
Over-discharge detect2.1 ± 0.1 V
Over-discharge delay0.1 s
Over-discharge release2.3 ± 0.1 V
Over-discharge current200 ± 30 A, 9 ms delay
Short circuit250 µs, release by disconnecting the load
Standby current< 50 µA
Operating temperature-30 to +80 °C
ApplicationE-bike, tricycle, low-speed EV, storage, solar inverter

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What are the dimensions?

87 × 35 × 8 mm. Check the mounting space against this figure rather than against the catalogue photo, because the enclosure adds wall thickness on every side.

What temperature range does it operate in?

-30 to +80 °C. That is the discharge window. Charging has its own limits, and the BMS thresholds have to match the cell data rather than a generic default.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote