Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / BMS / 4S 100 A BMS protection board with copper harness
4S 100A board with copper harness

4S 100 A BMS protection board with copper harness

Brand: Polytone
Part number: PT-BMS-4S100-H
Continuous current: 100 A
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

The same 4S 100 A board, supplied with a made-up copper harness: ring terminals at one end, plug at the board end, red and black leads cut to length. This is the version to specify when the pack is assembled on a bench rather than in a wire-processing shop.

Harness: tinned copper, ring terminals sized for M6 studs, balance leads terminated in the matching 5-pin housing.

Note: harness length is set at order — tell us the pack layout and we cut to suit.

Specification

4S 100 A BMS protection board with copper harness — specification
Configuration4S (12 V)
Continuous current100 A
FunctionsOver-charge, over-discharge, over-current, short circuit, balancing
Balance leads5-pin
CoolingAluminium heat sink on MOSFET bank
HarnessCopper harness with ring terminals included

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What continuous current can it take?

100 A. Size the cable and the busbar to this current with margin, and check that the BMS in your build is rated at least as high.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote