Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / BMS / 4S 100 A BMS protection board — 12 V sodium battery
4S 100A sodium battery protection board

4S 100 A BMS protection board — 12 V sodium battery

Brand: Polytone
Part number: PT-BMS-4S100
Continuous current: 100 A
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Protection board for a 4S (nominally 12 V) sodium-ion pack drawing up to 100 A continuous. The MOSFET bank sits under an aluminium heat sink, so the board can hold rated current without derating in still air.

What it does: over-charge and over-discharge cut-off, over-current and short-circuit protection, cell balancing and temperature input — the essentials for a 12 V pack sold as a drop-in replacement.

Wiring: 5-pin balance connector, separate charge and discharge paths. Supplied as a bare board; add the copper harness version if you want the leads made up.

Specification

4S 100 A BMS protection board — 12 V sodium battery — specification
Configuration4S (12 V)
Continuous current100 A
FunctionsOver-charge, over-discharge, over-current, short circuit, balancing
Balance leads5-pin
CoolingAluminium heat sink on MOSFET bank
HarnessNot included

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What continuous current can it take?

100 A. Size the cable and the busbar to this current with margin, and check that the BMS in your build is rated at least as high.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote