48 V 160 Ah sodium-ion traction battery for electric forklifts. 17S1P, IP65, −40 to +60 °C, >5,000 cycles at 70% DoD. Sodium-ion cells in a steel case that drops into the compartment the lead-acid block came out of, with the BMS inside and no watering.
Why sodium-ion on a forklift
- Wide discharge temperature — a cold store and a summer dock from the same pack.
- High discharge power for the lift and drive motors together.
- Long cycle life, quoted at pack level over 80% DoD.
- No watering, no acid, no equalisation charge.
- Low self-discharge, so a parked truck comes back with charge in it.
Specification
- Model: 48V160Ah
- Form: Traction pack for industrial vehicles
- Chemistry: Sodium-ion (Na-ion)
- Nominal voltage: 48.4 V
- Nominal capacity: 160 Ah
- Minimum capacity: ≥155 Ah
- Rated energy: 7,700 Wh
- Operating voltage range: 34.0–58.6 V
- Fast-charge voltage: 58.6 ±0.2 V
- Float charge voltage: 51.0–53.5 V
- Low-voltage cut-off: 34.0–37.4 V
- Standard charge current: 80 A
- Recommended charge current: ≤80 A
- Maximum charge current: 160 A
- Standard discharge current: 80 A
- Recommended discharge current: ≤80 A
- Maximum discharge current: 300 A
- Peak discharge current (3 s): 500 A
- Internal resistance: ≤20 mΩ
- Charge temperature: 0 to +55 °C
- Discharge temperature: −40 to +60 °C
- Cycle life: >5,000 cycles (25 °C, 0.5C, 70% DoD)
- Cell configuration: 17S1P
- IP grade: IP65
- Weight: 125 ±10 kg
- Dimensions: 730 × 400 × 350 mm
- Packing dimensions: 780 × 450 × 430 mm
- Low-temperature charging: Heating supported
- BMS: Built in — state monitoring, fault protection, communication; 4G optional
- Bluetooth: Supported
- Application: Electric forklifts, warehouse trucks, industrial vehicles
SOC and OCV
| 25 °C discharge, 0.5P |
25 °C charge, 0.5P |
| SOC |
OCV (V) |
SOC |
OCV (V) |
| 100% |
55.25 |
0% |
39.10 |
| 90% |
53.04 |
10% |
47.77 |
| 80% |
52.36 |
20% |
50.66 |
| 70% |
51.68 |
30% |
51.68 |
| 60% |
51.00 |
40% |
52.36 |
| 50% |
50.32 |
50% |
52.70 |
| 40% |
49.30 |
60% |
53.04 |
| 30% |
47.94 |
70% |
53.38 |
| 20% |
45.05 |
80% |
53.72 |
| 10% |
39.10 |
90% |
54.57 |
| 0% |
27.20 |
100% |
56.10 |
Scope
Supplied assembled and tested, with the BMS set for the charger on site. Tell us the truck model and the charger voltage and we will confirm the connector and the cut-off before dispatch.
Datasheet, declarations and warranty terms for this model.
Open datasheet (print or save as PDF) →
Declaration of conformity and warranty statement are issued with the order. Ask for the current revision if your design is already frozen.