Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Components / BMS / 3S 120 A BMS — common port with balancing, 12.6 V (NCM)
120 A BMS board with aluminium plate

3S 120 A BMS — common port with balancing, 12.6 V (NCM)

Brand: Polytone
Part number: PT-BMS-3S120
Charge voltage: 12.6 V
Continuous current: 120 A
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

3S protection board rated 120 A on a common port — charge and discharge share the same P+ / P- terminals, so the pack needs one pair of cables. Balancing is built in.

Chemistry: thresholds are set for Ternary (NCM), with a 12.6 V charge voltage. Board, cell harness and terminals are matched to that chemistry — do not mix the 12.6 V, 14.6 V and 16.8 V versions.

Build: the MOSFET bank is clamped under an aluminium plate, which is what lets a board this size run 120 A without a fan.

Common port, why it matters: one cable pair instead of four, and the charger sees the same terminals as the load — simpler wiring inside a small enclosure.

Specification

3S 120 A BMS — common port with balancing, 12.6 V (NCM) — specification
Configuration3S
Continuous current120 A
Port typeCommon port (same P+ / P- for charge and discharge)
BalancingYes
Charge voltage12.6 V
ChemistryTernary (NCM)
Heat managementAluminium plate over the MOSFET bank
HarnessCell harness included
Application12 V / 16.8 V pack assembly

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What continuous current can it take?

120 A. Size the cable and the busbar to this current with margin, and check that the BMS in your build is rated at least as high.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote