24 V 320 Ah sodium-ion traction battery in a 195 mm slim case. 9S2P, IP65, −40 to +60 °C, >3,000 cycles. Sodium-ion cells in a steel case that drops into the compartment the lead-acid block came out of, with the BMS inside and no watering.
Why sodium-ion on a forklift
- Wide discharge temperature — a cold store and a summer dock from the same pack.
- High discharge power for the lift and drive motors together.
- Long cycle life, quoted at pack level over 80% DoD.
- No watering, no acid, no equalisation charge.
- Low self-discharge, so a parked truck comes back with charge in it.
Specification
- Model: 24V320Ah-S
- Form: Traction pack for industrial vehicles
- Chemistry: Sodium-ion (Na-ion)
- Nominal voltage: 25.6 V
- Nominal capacity: 320 Ah
- Minimum capacity: ≥310 Ah
- Rated energy: 8,200 Wh
- Operating voltage range: 18.0–31.0 V
- Fast-charge voltage: 31.0 ±0.2 V
- Float charge voltage: 27.0–28.3 V
- Low-voltage cut-off: 18.0–19.8 V
- Standard charge current: 150 A
- Recommended charge current: ≤150 A
- Maximum charge current: 150 A
- Standard discharge current: 160 A
- Recommended discharge current: ≤160 A
- Maximum discharge current: 200 A
- Peak discharge current (3 s): 450 A
- Internal resistance: ≤20 mΩ
- Charge temperature: 0 to +60 °C
- Discharge temperature: −40 to +60 °C
- Cycle life: >3,000 cycles (25 °C, 0.5C, 80% DoD)
- Cell configuration: 9S2P
- IP grade: IP65
- Weight: 127 ±10 kg
- Dimensions: 750 × 195 × 575 mm
- Packing dimensions: 810 × 255 × 675 mm
- Low-temperature charging: Heating supported
- BMS: Built in — state monitoring, fault protection, communication; 4G optional
- Bluetooth: Supported
- Application: Electric forklifts, warehouse trucks, industrial vehicles
SOC and OCV
| 25 °C discharge, 0.5P |
25 °C charge, 0.5P |
| SOC |
OCV (V) |
SOC |
OCV (V) |
| 100% |
30.56 |
0% |
14.42 |
| 90% |
28.65 |
10% |
23.51 |
| 80% |
26.84 |
20% |
25.02 |
| 70% |
26.11 |
30% |
25.38 |
| 60% |
25.74 |
40% |
25.74 |
| 50% |
25.47 |
50% |
26.00 |
| 40% |
25.20 |
60% |
26.27 |
| 30% |
24.83 |
70% |
26.63 |
| 20% |
24.47 |
80% |
27.34 |
| 10% |
22.92 |
90% |
29.12 |
| 0% |
13.44 |
100% |
31.00 |
Scope
Supplied assembled and tested, with the BMS set for the charger on site. Tell us the truck model and the charger voltage and we will confirm the connector and the cut-off before dispatch.
Datasheet, declarations and warranty terms for this model.
Open datasheet (print or save as PDF) →
Declaration of conformity and warranty statement are issued with the order. Ask for the current revision if your design is already frozen.