Skip to content
New product 12 V 100 Ah sodium-ion truck starting battery, 1500 CCA, Group 31T See the launch →
Home / Products / Cases / Lithium / sodium cases / 12 V 7 Ah — 152 × 65 × 98 mm
12 V 7 Ah — 152 × 65 × 98 mm

12 V 7 Ah — 152 × 65 × 98 mm

Brand: Polytone
Part number: ES12-07-A
Weight: 157
Outer dimensions: 152 × 65 × 98
Availability: In stock
Price on request — quoted per configuration, quantity and Incoterm.Ask for a price →

Matching parts

Pairing a bracket with the cavity sets how many cells go in, and that sets the capacity. Tell us the cell format and we will confirm the fit.

A moulded 12 V 7 Ah shell, supplied empty, for builders who assemble their own packs. The outer size is 152 × 65 × 98 mm and the internal space is 144 × 58 × 75 mm — the internal figure is the one that decides which cell stack goes in, because the wall thickness and the lid rail take the difference.

What it matches

F1/F2 spade terminals, the same footprint as the standard 12 V 7 Ah lead-acid block, so it drops into alarm panels, gate openers, emergency lighting and small UPS units without changing the wiring. Weight of the empty shell is 157 g.

Where it does not fit

A 144 × 58 mm cavity will not take a prismatic cell larger than that in any orientation, and the lid has no space for a BMS board bigger than a matchbox. If the build needs a 100 A continuous output, this is the wrong shell — go to the 12 V 12 Ah or larger case.

Specification

12 V 7 Ah — 152 × 65 × 98 mm — specification
Outer dimensions152 × 65 × 98
Inner space144 × 58 × 75
Weight157
TerminalsF1/F2

Ordering: MOQ and lead time

These figures are quoted by order type rather than per part number, because the same cell can ship from stock or start a new tooling project. If your quantity sits between two rows, the smaller one applies until a change is needed.

Minimum order quantity

Sample evaluation 1 unit A single piece, so you can test the chemistry and the fit before committing to a batch.
Standard catalogue item 5–10 units The stocked line: cells, cases and components that need no change before shipping.
New ODM design 100–200 sets New structure, new BMS protocol or new housing tooling. The batch size covers the setup work.
Large project quoted per project Container-scale and framework agreements are quoted against the schedule, not against a unit price.

Production lead time

Stock item 3–5 working days Shipped from stock once the order is confirmed.
OEM (silk print, label, packaging only) 15–20 working days Same structure and same BMS. Only the marking and the packaging change.
New ODM (new structure, BMS protocol, housing, diesel-to-electric) 30–35 working days Counted from specification freeze, not from the enquiry.
Adding a certification +15–30 days On top of the production time above. The laboratory sets the schedule, not us.

Shipping transit is quoted separately and starts after production finishes. We do not publish a transit figure, because it depends on the forwarder, the route and the season — ask for it with the order and we will quote the current rate.

Questions buyers ask

What are the dimensions?

152 × 65 × 98. Check the mounting space against this figure rather than against the catalogue photo, because the enclosure adds wall thickness on every side.

How much does it weigh?

157. For freight the packed weight is higher: crating and pallet add to this figure, so ask for the shipping weight when you book.

Request a quote Ask an engineer Preview the datasheet

Full A4 datasheet, one page. We store the address to answer you — nothing else.

WhatsApp Request a quote